The Society of Professional Engineers (International)
Administration System
The
Institution of International Professional Engineers Administration System
The
Society of Professional Engineers (International) is largely using online
society system.
Main Contact
thespeukinternational@gmail.com
The
Society of Professional Engineers International and International Association
for Quality Assurance in Higher Education
www.thespeukinternational.org/QAHESPEICert.JPG
SPE
International-Area Representatives
www.thespeukinternational.org/SPE
International-Area Representative - 2022.pdf
At the moment, the following international
organizations are major branches of The Society of Professional Engineers
(International)
STC
Technological University is education service of The
Society of Professional Engineers International.
Weblink 1
Click HERE.
Weblink 2
Click HERE
STC
Training Centre (Senior Technical Consultants Training Centre) in Australia owned by The Society of Professional Engineers International
teaches the recognized trade courses.
STC
Training Centre issues AIBT (Applied Industrial and Business Training) ,IAMA (Industry and Management Academy) and EIT
(Engineering Industrial Training) Certificates and Diplomas.
Italy
Mr Lino Dare
is a representative of SPE International in Italy
E mail
|
|
|
|
linodare@hotmail.com,
South Africa & UK Branch
Peter Enfield is
representative in SPE International in South Africa branch as well as UK Branch
E mail
India and Pakistan Branch
Mr Mustafa Assad manages SPE
International in India and Pakistan branch
.
Indo Pakistani Professional Engineers Group
E mail
mustafa3000@gmail.com
University of Lahore
Pakistan
Singapore & Malaysia
Singapore Dr Sam
Man Keong of Singapore Institute of
Engineering Technologists is a
representative of SPE International in Singapore
Singapore
Institute of Engineering Technologists
No. 96, Waterloo
Street o Singapore 187967 ， Tel: +65 96740515 (Singapore); +65 280 7712
(Malaysia) ，
Emails: info.sietorgsg@gmail.com; sammk1951@gmail.com
All other
correspondence shall be made to SIET's Postal address Clementi
Central PO Box 103, Singapore 911204, SINGAPORE Website https://www.sietinternational.com/
PE (International)
Assessment by SIET
http://www.thespeukinternational.org/SIET
Pathways to SPEInternational - PE(Int) - 17 Sept 2022.pdf
CPD Program of SIET
http://www.thespeukinternational.org/SPE
International-SIET-IQY-CBA-28 Sept 2022a (1).pdf
Administrative details
IQY SIET SPE International
Myanmar, Thailand,
Korea, Japan,USA,Europe
Dr Kyaw
Naing of The Institution of Professional Engineers Myanmar (IPEM) is a
representative of SPE International in Myanmar.
E mail iqytechnicalcollege@gmail.com
Address
IQY Technical College
Education and Training Branch of The Institute of Professional Engineers Myanmar and
Authorized Training Centre of Singapore Institute of Engineering Technologists
Website / Contact
The Institution of Professional
Engineers Myanmar
www.ipemyanmar.org www.ipemyanmar.blogspot.com
IQY Technical College
Australia
The Society of
Professional Engineers International (NSW Australia) Chapter
C/O IQY Technical
College
Suite 57/330 Wattle Street , Ultimo NSW 2007
Sydney, Australia
https://www.thespeukinternational.org/Australia.htm
Supporting Company
Mr Michael Moore
Pacific Engineering
PO BOX 227, Marrickville, NSW1475, Sydney, Australia
China,
Macau, Hong Kong
Dr Tommy Ho (Chung Ming HO)
PEng(Int),FSPE(Int),Hon. FHKEnv, Hon. FSEE,
FCABE, CBuildE, CEnv
President of SPE
International Chapter in China, Macau and Hong Kong
HCL International
Our
management system will be largely de-centralised
because in the past, the Executive Committee located in UK only determined the
fate of the society and without having the votes of the international members,
it merged the society to IET resulting the risk of losing the PE title by all
of us.
It is
important for us to prevent such unpleasant thing forever in the future.
For
this reason, the following administration system of central administration and
our major friends located in countries of the World will assist SPE
International (IIPE)
Tasks of
the Central Administration of The Society of
Professional Engineers (International)
， Accepting the former Society of Professional Engineers (UK) Members to be
given life membership and register
， Issuing the membership admission procedures.
， Developing the format of Membership Certificates which can be issued by each
branch located in the country
， Accepting the registers of newly admitted members whom are
assessed and admitted into the membership by each country branch
， Co-ordinating the branches located in
different countries.
For
this reason, the members of the Society of Professional Engineers
(International) who are MSPE/ FSPE/PEng(International) are requested to serve as the leaders to
promote SPE International (IIPE) , one per each country .
Only one organization or person who will take the responsibility
for promoting our activities in each country. If there are more than one person, appropriate discussion
and election is to be done to form a Executive Council
If
required, our central administration will assist to provide the networking.
Membership
Grades
The
following grades will be given for newly elected members
1. Graduate
Technical Engineer +Associate of The Society of Professional Engineers
(International) (GradTEng,ASPE(International)
(Requirement- Advanced Diploma/
Higher Diploma in Engineering or BTech in
Engineering) Graduates.
2. Graduate
Professional Engineer +Associate of The Society of Professional Engineers
(International) (GradPEng,ASPE(International)
(Requirement- Advanced Diploma/
Higher Diploma in Engineering or BTech in
Engineering) Graduates.
3. Technical
Engineer + Associate of The Society of Professional Engineers
(International) TEng,ASPE(International)can
also be issued
for experienced Engineers who have not got BE degrees.
4. Professional
Engineer, Member/ Fellow of The Society of Professional Engineers
(International) (PEng,MSPE/FSPE
(International)
(Refer the current membership
admission procedure on application pack)
Tasks of
Each Affiliated Organization
， Assess the membership
， Collect the admission fees and annual subscription
， Use this fund for functions ,development and
professional development activities administered by each branch
， Issue the membership certificates
， Send the list of members to Central Administration Quarterly
Registration
Format/ Membership Number
All SPE
(UK) Members whom are given Life Members have their membership
numbers begin with A. For example A10994
etc. We do not change this number and membership certificates
For new
members admitted by each branch will have the membership numbers in the
following format.
Graduate
Technical Engineer
GTxxxxxx/20xx/Country
For
example Anil Prasad , Graduate Technical
Engineer, admitted in 2019 in India
Anil
Prasad GT1/2019/India
His
title will be Anil Prasad GTEng,ASPE(International)
Graduate
Professional Engineer
GPxxxxxx/20xx/Country
For
example Maung Maung , Graduate
Technical Engineer, admitted in 2019 in Myanmar
Maung Maung GP45/2019/Myanmar
His
title will be Maung Maung GPEng,ASPE(International)
Professional
Engineer
Pxxxx/20xx/Country
For
example Henry Cheng , Professional Engineer,
admitted in 2019 by the branch in Singapore
Henry
Cheng P12/2019/Singapore
His
title will be Henry Cheng PEng,MSPE(International)
Technical
Engineer
Txxxx/20xx/Country
For
example, Mr Netani Valu, Technical Engineer , admitted
in 2019 by branch in Fiji or Central Administration if the branch has not
existed in Fiji
Netani Valu T13/2019/Fiji/Central
Admission
of fellow will also be the same system.
If the
person is later transferred to Graduate to Member, New Registration Number and
the Registration Number of first admission are will be recorded.
For example , Anil Prasad becomes PEng in
2023,
Anil
Prasad P207/2023/India (GT1/2019/India)
Graduate
Technical Engineer can become PEng as per
the Membership Admission System of SPE (International).
PEng Seal
Follow
the seal procedure
Membership
Certificate
The
format in Word and PDF Version will be sent to the most responsible person of
the branch in each country
Cross
Border Admission
Each
branch in each country can only admit a person who got residential address in
the country. (Only residential address will be referenced for admission, there
must be no restriction on nationality, immigration status etc)
Cross
border admission is not allowed.
There
must be only one branch in each country. If several organizations want to take
the position, it will be their tasks to resolve the matter to form a branch.
Reciprocal
Recognition and Standardization
It is
to be mutually developed by our affiliated organizations.
Admission
of membership for the candidates where no branch exists in the country of
residence
Central
administration will do it
Financial
Matter/ Membership Fees etc
Each
branch can freely set the membership fees appropriate to their country
situation and maintain the fund in accordance with the legal system of the
respective country.
Unless
fund transfer is needed for special purpose of the Central Office, no fund
needs to be transferred to central administration.
Venue and
financial account of Central Administration
The
role of central administration is to co-ordinate the affiliated organizations
which will have equal authority . For this
reason, only online system will be kept and no central financial
account will be set.
For
necessary fund transfer, only the account
of our representative will be given. But our function is to be based on each
branch mainly, financial control by central administration is unnecessary.
Request
All
current PEng,MSPE/FSPE
(International) members are requested to send me your wish to establish the
branch in your country.
No
proposal will be accepted for Singapore, Australia and Myanmar where SPE(International) have already had affiliated
organizations.
Dr
Peter Prasad
Executive
Officer
The
Society of Professional Engineers International
The
Institution of International Professional Engineers
Xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
The Society of Professional Executives (International)
Administration System
Contact
thespeukinternational@gmail.com
